Mc-techgroup ECM-ExII Operator's manual Manual de usuario descargar pdf (Pagina 12)

Gas sampling and gas conditioning technology 3-3.0EX-ME

+5°C

Sample

OUT

Sample

Condensate OUT

Cooling

block

Figure 3 Schematic diagram of the heat exchanger function

13 RECEPTION AND STORAGE

The ECM-ExII gas cooler is a complete pre-installed unit.

 Carefully inspect the ECM-ExII and any special accessories included with it immediately on

arrival by removing them from the packing and checking for missing articles against the

packing list!

 Check the items for any damage in transit and, if required, inform the shipping insurance

company immediately of the damage found!

NOTE!

The cooler must be stored in a weather protected frost-free area!

During transport and when in storage, the cooler must always be stood up

with the transport feet positioned underneath so that the oil in the closed

compressor circuit cannot run out of this compressor case.

If the cooler is transported on its back by mistake, it must stood in the

operating position for approx. 24 hours before it is switched on!

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Sin comentarios

Mc-techgroup ECM-ExII Operator's manual Manual de usuario Pagina 12